Monday, August 1, 2011

Giveaway and Farbenmix upcycle ideas

***Giveaway Complete 8/8/11**

I have a bit of an obsession with up-cycling tee shirts. I think an old worn out tee is the best craft medium of all time. Super soft and comfy, available in abundance, and such a lovely way to immortalize an old loved object that has perhaps passed it's prime. Tees are especially wonderful for upcycling  into children's clothing. A large shirt provides enough fabric for almost limitless kiddo attire options. Maybe down-cycling would be a more fitting term in such cases. I am always on the lookout for patterns that lend themselves to such a use. It's no surprise that Farbenmix patterns comprise a large part of my go-to list. The story goes that designer Sabine Pollhen began sewing for her own child by re-purposing hand-me-downs clothes. Here are a couple of my current faves:

This Brooklyn Tank Top was reclaimed from a tee once belonging to my brother. The skirt is another Farbenmix faveorite, the Insa. The outer skirt is an old pair of my jeans and the inner skirt was cut from the same Itchy & Scratchy tee.
 My hope is that the raw denim edges will fray out with wash and wear, giving this skirt a bit of a punky look. I will let you know how it goes.




Another Brooklyn/Insa combo, this time as a dress. I simply straightened the hem of the tank and omitted the waistband of the skirt, sewing the two together.

It's former life: This green band tee was much loved by it's owner but fell victim to an untimely ink stain. I convinced her to let me take the scissors to it, saying it was for her daughter's greater good. It turned out to be just one Insa panel shy of the full outer skirt so I threw in the bottom half of an old Dallas stars shirt for contrast. (Still saving the top half for that for a hockey season outfit)


 Here we are at the beach in another Brook-Insa dress. (Insa-Brook?) This time I folded over the waist band and encased a loop of elastic. I am not sure it needs it, but it gives a bit of a different style. I also omitted the outer skirt since the top fabric is very lightweight and I'm not sure it would have held up the weight of a double skirt.

It's former life: The skirt and the ties are cut from an old maternity shirt my neighbor asked me to "see what I could do with". She was impressed with how nicely it complimented this zodiac baby tee that I was not quite ready to let go of. It was hard to chop up, but it was doing nothing for my muffintop.

100_5527

100_5547


100_5548


Tee downcycles; economical, easy, and empowering parents to let go of questionable wardrobe choices. It's a win win.

On to the giveaway! In the spirit of upcycling, I am sending out an upcycle "kit" from my very own stash to one lucky winner. This prize includes 10 "Upcycle" tags and an awesome thrift-store score, this Dr. Seuss adult medium tee, just waiting to be turned into an adorable outfit for your little one.

100_5562 


100_5559

100_5558



100_5561

Could I say upcycle one more time? Yes I can, UPCYCLE. It's not even a word. Here's how to enter:

You can enter up to four times, but for each entry you need to post a separate comment below. I am turning on comment numbering and I will use http://www.random.org to pick a winning post. Look for the announcement in my post next Monday. 
1. Become a follower of this blog
2. Like us on facebook
3. Share a link to this giveaway on facebook
4. Follow us on twitter

Thursday, July 14, 2011

Faux G’s Part One: Sewing diapers with knit ribbing

Originally posted May 14th, 2009 at Cloth Revolution 

Make your own G Diaper style fluff! In my next post I will show you how to create the snap in waterproof "holster" to go with these, using FOE and PUL. But for today, lets start with step one, the rib legged diaper. These save a TON of fabric as opposed to a traditional contour shaped diaper and the fit is great. They can be used as a fitted diaper with a snap-in, hidden layer or lay-in soaker or even as pull up training pants.
(modeling courtesy of our life size newborn doll, a retired baby care class model)
Photobucket
Photobucket
Photobucket
You will need:

  • 3/4" velcro or other hook and looptape
  • 1' waistband or non roll elastic
  • knit ribbed fabric for leg cuffs
  • knit fabric for 2 body layers
  • knit fabric for waistband
  • if desired for a fitted style diaper: asorbant soaker fabric and extra knit fabric for hidden layer
Photobucket
Photobucket
Now that you have an idea of what were looking at, let's talk about sizing. Since this is just a bunch of rectangles, getting a custom fit is simple to do. First, measure the rise and waist of your baby. Basically, for the body, you can just use the baby's rise for the length and half of the baby's waist measurement for the width, subtracting the waistband thickness. For the waist band length, one end will be flush with the body layers, and the other end will extend 2 inches past the body layers on each side. In case that's clear as mud, here's a breakdown: (measurements in black are standard, red measurements are dependent on size)
short waistband: width: 2.5" , legnth: divide baby's waist measurement by 2
long waistband:width: 2.5" , legnth: add 4" to short waistband measurement
leg cuff ribbing: width: 2.5" , legnth: body layer legnth divided by 2 (this will vary depending on the amount of stretch in your fabric and how snuggly you want the legs to fit)
body layers: width: baby's waist measurement divided by 2, legnth: baby's rise measurement minus 2"
hook tape (scratchy side):
loop tape (fuzzy side)
*be sure to position your velcro so that the grain is going the same direction on the hook and loop pieces, or else it will not fasten as securely*
Fold the leg band ribbing in half legnthwise. Position it on top of the good side of one body layer. Leave enough ribbing extending above the top to grab from behind the presser foot, just as you would when working with elastic.
Photobucket
Position the other body layer, good side down, on top of the ribbing.
Photobucket
If you want to add a hidden soaker layer, it would go on top now. I reccomend using a stretch layer the same size as the other body layers, with a smaller soaker pad sewn to the middle. This way, you will maintain the stretch and not add too many layers to be sewn through.
Photobucket
Photobucket
With the needle down, stretch the folded ribbing tight and line it up in between the unstretched body layers. Zig-zag stitch through all four layers, all the way down the side. Since the body layers stretch only in the other direction, this is not as difficult as it sounds. Go slow and stop only with the needle down. Be careful not to let the any layers shift out of line. I like to stretch the ribbing all the way down and then take hold of it just a few inches from the top, sliding my grip down as I sew.
Photobucket
Here' s what one attatched leg band looks like from the inside...
Photobucket
And from the outside
Photobucket
Now repeat with the leg ribbing for the opposite side. It should be a mirror image of the other side. Folded side inward of the ribbing, all four cut selvages lined up on the edge.
Photobucket
Inside out with both leg bands attatched
Photobucket
Right side out with both leg bands attached
Photobucket

  • Go ahead and slice off any extra seam unevenness on each end, since the end seams will not be hidden like those pretty leg cuffs are.
Photobucket

  • Now for the waistband...
Photobucket

  • Fold the waistband peice in half legnthwise, good side out. You will position it on the good side of the body peice.
Photobucket

  • line up all cut edges. For the short side leave just a teeny bit of waistband (like 1/8') extending past each side. You can always trim it up after sewing if it turns out to be more than you need.
Photobucket

  • Use a zig zag stitch to sew on the waistband
Photobucket
attatched waist band folded up properly
Photobucket

  • For the longer waist band peice, you will want to match up the middle of the banf with the middle of the body to ensure an equal amount of overhang is left on each end. I'm not a big pinner but I reccomend using at least one pin to secure the middles together here.
Photobucket

  • You will then need to close up the open edge on each side. Tuck in the cut edge and sew it shut as close as possible to the edge using a straight stitch (dont worry, these little ends will not need to stretch since the velcro will be attatched here anyway)
  • Attach a safety pin to one end of the elastic and insert it into the waist band. Use the pin to pull the elastic through to the other side. Reapeat this for the other waistband as well. Be sure to use the right length of elastic for each side.
Photobucket

  • fold over the end and stitch down on top of the elastic with a straight stitch
Photobucket
Photobucket

  • Before sewing on the velcro, round off all the sharp corners so there is no risk of scratching the baby.
Photobucket

  • sew the two hook tabs to the inside ends of the long waistband piece, using a straight stitch
  • in the same way, sew the (longer) two loop tabs to the outside of the shorter waistband piece

Saturday, July 9, 2011

Hey there, it's been a while. I sure have been busy. You know, kids, work, school, my family lived in rural Mexico for a while. No seriously. I took pics.


Anywho, we are all settled now and I'm jumpin' back on the blog train. So to get things started I am dragging some old post over here to consolidate from Cloth Revolution. Don't my cloth diaper musings deserve their own blog? Arguably yes, but I like this one better. ; ) I also have a new format in the works that is, well, less pink. Stay tuned for that.

Wednesday, July 14, 2010

Free stuff from Fishsticks!

Fishsticks Designs is giving away all kinds of great stuff this week with their photo contest, but the best part is you don't even have to submit a photo to win! 
Goodies include MINKY diapers, mamma made tags and patterns.
Check it out on the Fishsticks and Fries blog
They've got a load of great free tutorials and some of the best indie knit clothing patterns available.

Thursday, May 6, 2010

Spikey Tutus

This is a fun little twist. To give a tutu the pokey look, start with a tie on strip style tutu (like step 1 here). All you have to do then is tie a little knot at the end of each individual strip! Kinda looks like some sort of exotic flower don't ya think?! Cute!
100_4572

Monday, May 3, 2010

Selling your diapers.........

I've been getting a lot of questions about licensing on the Cloth Revolution diaper pattern. I do not require WAHMs to obtain any sort of license or approval in order to sell diapers they have created with my pattern.

I do ask, however that you simply post a link to the pattern in your listings. I am working on getting a cute little button you can use for this (look for that soon) but until then the link will suffice:
http://themafiatutu.blogspot.com/2010/04/free-cloth-diaper-pattern.html

I also ask, out of general crafty courtesy, that you do not misrepresent the pattern under another name, claim that it is your own pattern, leave it nameless, or imply that I made it! Buyers like to know what they are buying! So please label it as the Cloth Revolution pattern, but don't forget to tell them it was made by you! : )

I would love to see your listings! If you are selling from the pattern, feel free to send me a link at clothrevolution@gmail.com You could be selected as a Featured Diaper Artist on this site!


Also, if you are a WAHM diaper seller looking for more exposure, you may want to consider becoming a site sponsor! This is a very affordable way to spread the word about your business. Email me for info on sponsorship opportunities for this site.

Friday, April 23, 2010

Free cloth diaper pattern!

*Update* If you see a message that says the document is unavailable, it's just google docs being weird. Just follow one of the links below the viewer and click download. You will then be able to view or save the file. Also, please note that I receive a HUGE volume of request to share the document in google docs and I just don't have time to manage that. Please just print it out or save it. <3


Click below to download the PDF document(s)!

Cloth Revolution diaper pattern

Pattern Instructions

 or  Pattern/Instructions in one document

If your like myself, you cut out the pattern and toss the instructions over your shoulder. In that case you can save time by just downloading the pattern file.

Now, if you would appreciate some well written, informative, love filled photo instructions that have been called "the best diaper sewing instructions ever, free or otherwise" then go ahead and download both documents!


The pattern pieces need to print out to scale, so before you print, be sure to turn off auto-rotate and center. There is a 1 inch square on each page, so verify that the box is actually one inch square!

DSCF1350Stars
Awesome photos by jgmzii !

         PRINTING ISSUES CHECKLIST:
  • Check that you have the latest version of adobe reader
  • Turn off auto rotate, center, and page scaling on the print set up page
  • Set orientation to landscape
  • If you downloaded one of the individual documents, and you're getting a message about a password to print (this has happened to a few people but most can print w/o problems) try the pattern and instructions in one document instead.

    Now get to sewing, show off your creations in the Flickr Pool,
    then come back and show me some 
      Creative Commons License
      The Cloth Revolution Diaper Pattern by cloth revolution is licensed under a Creative Commons Attribution-Share Alike 3.0 United States License.
      Based on a work at themafiatutu.blogspot.com.
      Permissions beyond the scope of this license may be available at
      Related Posts Plugin for WordPress, Blogger...